此主题相关图片如下：
如题，可以测试喇叭内部音圈线温度的仪器，规格说明如下：
This meter measures the temperature of a speaker voice coil (copper or aluminum) during operation, and indicates the result on two digital meters.
此表能量测工作时喇叭内部音圈（铜或铝线）的温度，且在两个数字表上显示测试结果。
Temperature and input voltage are displayed on two digital meters simultaneously.
温度和输入电压可以同时显示两个数字表上。
Measurement can follow the signal sources of sine wave, white noise, pink noise or music source in the frequency range of 20Hz to 20kHz.
测试能够遵从正弦波信号，白噪声，粉红噪声或音乐信号，频率范围从20HZ到20KHZ。
Maximum input power: 1kW peak (at 8Ω load)
最大输入功率：1千瓦（峰值，当负载为8Ω 时）
Measuring range: 0℃ to 400℃
量测范围：0度到400度
DC resistance of speakers to be tested: 1.5 to 40Ω
Recorder output terminals: Both the input voltage and related temperature can be simultaneously recorded to show the relationship between the two.
IMPORTANT: Signal sources and a power amplifier are not built in.
[此贴子已经被作者于2006-10-30 20:35:55编辑过]
加好友 
发短信
Post By：2006-10-30 20:34:24 [显示全部帖子]
